Connect with us

Technology

CSA 2020 members share scrubber installation tips to shipowners

Recommends use of quality, high-end materials after experience from more than 1,500 EGCS installations.

Admin

Published

on

5df99bb4b69db 1576639412

Members of the Clean Shipping Alliance (CSA) 2020 have recently shared advice to shipowners looking to install marine exhaust gas cleaning systems as way of meeting global sulphur cap requirements.

Based on the collective experience gained from more than 1,500 EGCS installations, CSA 2020 members found the quality of materials and coatings used is the most important factor in optimising EGCS safety and averting any corrosion problems during operation, they say.

“There are always some challenges involved when specifying ships' machinery systems and scrubbers are no different,” said Arne Hubregtse, Executive Board Member, Spliethoff.

“Risks can be mitigated, however, by investing in quality materials, established suppliers and experienced installers, and by optimising machinery space layouts.

“We have installations onboard about 50 vessels in the Spliethoff fleet and to date we have not experienced any corrosion or other significant issues through operating these systems. In addition to the specification of quality materials we recommend experienced installers with good supervision during the installation process.”

Echoing Spliethoff's experience is Wallenius Wilhelmsen, a shipowner operating a fleet of more than 130 deep sea ro-ro vessels.

Roger Strevens, Vice President, Global Sustainability, Wallenius Wilhelmsen, said: “While EGCS failure is not impossible, just as it is with any machinery, we believe we have minimised the risk – particularly of early-onset severe failure – by being very judicious in how we specify the systems and through being particular in who we are getting them from. If you buy cheap, you'll pay twice!”

Wallenius Wilhelmsen installed its first EGCS in 2014 knowing that, like any first-of-type-installation, there would be the inevitable teething troubles. “We learned a lot from that first installation. The experience proved invaluable to subsequent installations,” added Strevens.

Over 200 exhaust gas cleaning systems aboard 83 ships operating under the Carnival Corporation umbrella have also been largely reliable, with Mike Kaczmarek, Sr. Vice-President Marine Technology, Carnival Corp, citing over 90% current system availability.

Kaczmarek, CSA 2020's Chairman, said: “We have found EGCS systems are designed for world-wide operations and normally meet or exceed the specification. However, there are a few things to be aware of and, for example, we do recommend that the upper bellows (expansion joints) above the EGCS tower are replaced with a design using upgraded alloys during the installation process. This can help prevent any subsequent corrosion. Selection of quality materials is important.”

Grimaldi Group, which operates four different EGCS over 50 ships and also reports more than 90% reliability, also flags up the bellows as requiring special attention.

Dario Bocchetti, Head of the Grimaldi Group Corporate Energy Saving & Innovation, said: “The expansion bellows after the scrubber and the exhaust gas line can create problems. It is important to use high quality steel or alloys and make sure anti-corrosion coatings have been properly applied to the discharge outlet. Good specification and subcontractor selection can prevent problems later.”

“By confirming the operational performance of our members' EGCS installations, we hope to allay any concerns relating to system failure or corrosion,” said CSA 2020 Executive Director Ian Adams. “The technology, the materials used, and the experienced gained from those first installations means that any corrosion issues can now be readily resolved.”

In November, Danish ferry operator DFDS reported that the downtime experienced with the EGCS installed onboard the 37,939 gt roro Ficaria Seaways was less than 0.002% during the 12-month period to 1st July 2019.

Photo credit: Clean Shipping Alliance 2020
Published: 18 December, 2019

 

Continue Reading

Technology

Genevos and Koedood Marine Group team up on maritime hydrogen fuel cell deployment

Collaboration will explore how ready-to-use marine fuel cell systems can support shipowners and shipyards in the transition towards zero-emission operations.

Admin

Published

on

By

Genevos and Koedood Marine Group team up on maritime hydrogen fuel cell deployment

Marine fuel cell systems provider Genevos recently said the company signed a Letter of Intent (LOI) with engine supplier Koedood Marine Group to explore the deployment of hydrogen fuel cell systems for inland and coastal maritime transport. 

The LOI was signed by Phil Sharp, co-founder and CTO of Genevos, and Mühlheim, Business Development Director of Koedood Marine Group during the 2026 Advanced Maritime Technology Show in Amsterdam.

Building on Koedood’s proven experience in hydrogen maritime projects – including its ongoing work with Mitsubishi Heavy Industries and TNO on hydrogen engine development – the collaboration will explore how ready-to-use marine fuel cell systems can support shipowners and shipyards in the transition towards zero-emission operations. 

“Koedood has a strong reputation in the maritime sector and a deep understanding of vessel operators’ needs. This LOI is an important step in exploring how Genevos’ hydrogen fuel cell systems can be deployed more widely across inland and maritime applications, helping shipowners reduce onboard emissions with robust, practical and scalable clean power solutions,” said Sharp.

The collaboration aligns with growing market demand for rapidly deployable hydrogen solutions and the wider need to accelerate the adoption of zero-emission technologies across the maritime sector. 

“With this collaboration, we are further strengthening our portfolio of maritime energy solutions. Together with Genevos, we are exploring how we can support our customers in the adoption of hydrogen technology,” said Mühlheim.

 

Photo credit: Genevos
Published: 20 July, 2026

Continue Reading

Wind-assisted

DNV awards TADC to Econowind for VentoFoil 3-Series

System actively harnesses wind power to generate forward thrust, helping to reduce bunker fuel consumption and mitigate FuelEU penalties.

Admin

Published

on

By

DNV awards TADC to Econowind for VentoFoil 3-Series

Dutch wind-assisted propulsion technology firm Econowind on Wednesday (15 July) said it has received a Type Approval Design Certificate (TADC) from classification society DNV for its VentoFoil 3-Series boundary layer suction wing. 

The company said the certification confirms compliance with DNV’s ST-0511 standard for Wind-Assisted Propulsion Systems and enables easier integration of VentoFoils on DNV-classed vessels worldwide. 

Econowind added that the approval accelerates the deployment of wind propulsion across the shipping industry.

“DNV is one of the world’s leading classification societies. This TADC gives DNV-classed shipowners confidence that VentoFoils meet the highest industry standards,” said Chiel de Leeuw, Chief Commercial Officer at Econowind. 

“It simplifies the approval process for both retrofits and newbuilds. VentoFoils are ideal for late-stage design integration and retrofit projects. This is an important milestone for Econowind and for the wider adoption of wind-assisted ship propulsion.”

The 3-Series VentoFoil is Econowind’s best-selling suction wing to date, with over 150 units sold. The system actively harnesses wind power to generate forward thrust, helping to reduce fuel consumption and mitigate FuelEU penalties. The system includes a tilting foundation, allowing the wings to be tilted down during port operations or in adverse weather conditions, making it a flexible solution.

The TADC applies to the 16-meter VentoFoil 3-Series product design and supports easy integration into DNV-classed vessels without repeating the full design assessment process. This enables shipowners, shipyards, and project teams to move more efficiently from concept to installation, reducing project complexity and accelerating deployment. 

Hasso Hoffmeister, Senior Principal Engineer at DNV Maritime, said: “It is a great pleasure to award Econowind this new certificate. WAPS have been going from strength to strength over the past few years, from 2022 the number of vessels in operation has increased five times, and we’ve now topped the century mark. 

“And with the current advances in technology, materials, and production capacity in the segment, we expect this to accelerate. So, while the wind always changes, the shipping industry is likely to be sailing strong for years to come.”

Econowind expects the DNV Type Approval Design Certificate to accelerate adoption of the VentoFoil, particularly among shipowners seeking proven, independently certified technology that can support fuel savings, emissions reductions, and decarbonization goals.

MS Heinz of HS Schiffahrt is among the first vessels to sail under this TADC.The company said the approval builds on Econowind’s growing installed base and further strengthens confidence in wind-assisted ship propulsion as a practical solution to address energy scarcity and high fuel prices. 

In addition to the 3-Series, Econowind offers the 5-Series for the deep-sea market.

 

Photo credit: Econowind
Published: 17 July, 2026

Continue Reading

Technology

Malaysia: Maharani Freeport to implement MFM and e-BDN technologies for enhanced bunkering transparency

Initiatives reflect the Freeport’s commitment to delivering transparency, operational integrity and international best practices across its bunkering ecosystem, says MEG spokesperson.

Admin

Published

on

By

MEG 1145 cropped MT

Maharani Freeport, a National Project officially launched by His Majesty Sultan Ibrahim, King of Malaysia, in November 2025, will be introducing mass flowmeter (MFM) and electronic bunker delivery note (e-BDN) technologies to its bunkering operations, learns Manifold Times.

These strategic initiatives underscore the port’s commitment in establishing a highly transparent, efficient and trustworthy bunkering environment, aligned with global best practices and addressing critical industry demands, according to a Maharani Energy Gateway (MEG) spokesperson.

MEG is the Master Developer of Maharani Freeport and seeks to position the Freeport as a strategic nexus for shipment, storage and trading operations on a global scale. MEG Synergy is the trading division and a wholly owned entity of MEG; it seeks to position Maharani Freeport as a strategic nexus for shipment, storage, and trading operations on a global scale.

As part of its long-term bunkering strategy, the Freeport is currently in the process of acquiring bunker vessels of various sizes to support marine fuel deliveries and accommodate the evolving requirements of regional and international customers. These vessels will be equipped with MFM technology to ensure accurate, transparent and efficient fuel transfer operations.

Including bunkering and ship-to-ship (STS) trading operations from its High Sulphur Fuel Oil (HSFO) Floating Storage Unit (FSU), MEG Synergy already oversees a healthy volume of Bunker cargo deliveries to regional players each month.

MFM for Trust, Transparency and Traceability

MEG highlighted the custody transfer of bunker fuels at the Freeport will be handled by MFM-equipped bunker tankers.

“The adoption of MFM technology to support bunkering operations is a direct response to persistent industry challenges such as quantity discrepancies and delivery disputes,” explained the spokesperson.

“By equipping our bunker vessels with certified mass flowmeters, we aim to ensure precise and verifiable fuel delivery measurements.

“This initiative is pivotal in fostering trust among customers and strengthening the Freeport’s reputation as a professionally managed zone where businesses can operate with confidence. The overarching goal is to create a secure and well-governed environment for commercial activities, reducing operational risks and uncertainties while supporting efficient and transparent trade.”

e-BDN to Digitalise Documentation Workflow

The implementation of electronic bunker delivery notes (e-BDN), together with MFM technology, further aligns with the Freeport’s focus on creating comprehensive digital custody transfer records and robust data retention systems, added the spokesperson.

This digital approach, integrated with MFM technology, will streamline operational workflows, reduce administrative burdens and provide an immutable record of transactions to enhance transparency, minimising potential friction and expediting dispute resolution

MEG emphasised that the Freeport’s commitment extends beyond technological enhancements to encompass a comprehensive governance framework.

The port aims to adhere to stringent international standards, including those established by the International Maritime Organization (IMO), while offering dispute resolution mechanisms under the International Chamber of Commerce (ICC) to ensure the swift and fair handling of disagreements.

This holistic approach to operational integrity and governance is designed to address perceived transparency gaps, positioning the Freeport as a reliable and commercially attractive hub for the maritime and commodities sectors.

Note: For enquiries in respect of Maharani Freeport, readers may reach out to:

[email protected]

Related: Interview: Maharani Energy Gateway – Forging a new energy nexus in the Straits of Malacca
Related: New Johor bunkering hub: Maharani debuts as Malaysia’s first duty-exempted energy freeport

 

Photo credit: Maharani Energy Gateway
Published: 15 July 2026

Continue Reading

Trending